Router Teltonika RUTM55

  • 2x modem 5G Sub-6GHz (SA & NSA)
  • Wi-Fi 5 băng tần kép, tốc độ đến 867 Mbps
  • 4x cổng Ethernet Gigabit (1 WAN, 3 LAN, hỗ trợ PoE)
  • Hỗ trợ eSIM + 2 SIM vật lý, tối đa 7 profile
  • VPN đa giao thức: OpenVPN, WireGuard, IPsec…
  • Quản lý từ xa qua Teltonika RMS

Download Datasheet

0932.728.972

Danh mục: , Thẻ: , ,

Raycom là nhà phân phối chính thức (Master Distributor) của Teltonika & Volktek tại VN:
  • Sản phẩm chính hãng™ 100%, đầy đủ CO/CQ
  • Giá tốt cho đại lý/SI
  • Lưu kho số lượng lớn
  • Cam kết bảo vệ dự án cho đại lý
  • Tư vấn kỹ thuật và giải pháp miễn phí

Teltonika RUTM55 là bộ định tuyến công nghiệp mạnh mẽ hỗ trợ 5G Sub-6 GHz, mang đến tốc độ truyền tải cực cao lên tới 3.4 Gbps cùng khả năng kết nối đa dạng qua Wi-Fi 5, 4 cổng Ethernet Gigabit, và cổng RS232/RS485. Thiết bị này được thiết kế đặc biệt cho các ứng dụng công nghiệp, cung cấp độ ổn định cao với nguồn cấp 3-PIN công nghiệp và khả năng dự phòng vượt trội nhờ Dual SIM & eSIM auto-failover. Đây là giải pháp lý tưởng cho các hệ thống công nghiệp hiện đại cần hiệu suất, tính linh hoạt và độ tin cậy cao.

Teltonika RUTM55 (8)

Tính năng nổi bật của Teltonika RUTM55

1. Kết nối mạng 5G mạnh mẽ

  • Hỗ trợ 5G Sub-6 GHz với tốc độ tải xuống lên tới 3.4 Gbps và tải lên 900 Mbps (4×4 MIMO DL, 2×2 MIMO UL).
  • Hỗ trợ các mạng NSA/SA, đảm bảo khả năng tương thích với mạng 5G hiện tại và tương lai.
  • Tương thích ngược với 4G LTE (Cat 19, DL 1.6 Gbps) và 3G, đảm bảo kết nối liên tục trong mọi môi trường mạng.

2. Hệ thống SIM linh hoạt: Dual SIM & eSIM

  • Hỗ trợ Dual SIM vật lý và 1 eSIM với tính năng tự động chuyển đổi (auto-failover) giữa các SIM trong các tình huống: mất mạng, yếu sóng, hết dữ liệu, chuyển vùng, v.v.
  • Hỗ trợ 7 hồ sơ eSIM, dễ dàng tải/xóa cấu hình nhà mạng khi cần.
  • Chức năng SIM Idle Protection giúp tiết kiệm dữ liệu khi SIM chưa được kích hoạt.

3. Kết nối đa giao diện – Tối ưu tích hợp thiết bị

  • 4 cổng Gigabit Ethernet (1 WAN + 3 LAN) tự động MDI/MDIX, phù hợp với các hệ thống mạng hiện tại.
  • Hỗ trợ Serial RS232 và RS485, dễ dàng tích hợp với các thiết bị công nghiệp cũ (PLC, cảm biến, máy móc…).
  • Wi-Fi 5 (802.11ac Wave 2) hỗ trợ tốc độ lên đến 867 Mbps, Dual-Band, MU-MIMO, cho phép kết nối lên đến 150 thiết bị đồng thời.

4. Đáp ứng tiêu chuẩn công nghiệp khắt khe

  • Thiết kế nguồn vào 3-PIN công nghiệp chắc chắn, phù hợp môi trường công nghiệp khắc nghiệt.
  • Bộ xử lý MediaTek Dual-core 880 MHz, RAM 256 MB, NAND Flash 256 MB – đảm bảo xử lý mượt mà dữ liệu lớn.
  • Vỏ kim loại chắc chắn, độ bền cao.

5. Quản lý, bảo mật và giám sát toàn diện

  • Hệ điều hành RutOS (OpenWrt) với giao diện WebUI thân thiện, hỗ trợ quản lý từ xa qua Teltonika RMS, SNMP, MQTT, TR-069.
  • Bảo mật cao với tường lửa tùy chỉnh, VPN đa dạng (OpenVPN, IPsec, WireGuard, ZeroTier…), TPM 2.0, SSL, chống tấn công DDoS.
  • Tích hợp các tính năng như cổng Captive Portal, Hotspot, lọc WEB, lọc MAC, quản lý băng thông (QoS), VLAN…

6. Giao thức công nghiệp & IoT

  • Hỗ trợ nhiều giao thức SCADA/IoT như: Modbus TCP, MQTT, OPC UA, DNP3, DLMS/COSEM, Azure IoT Hub, ThingWorx, Cumulocity, giúp kết nối mượt mà với các hệ thống giám sát và điều khiển hiện đại.
  • Cho phép xử lý và gửi dữ liệu từ nhiều nguồn khác nhau lên máy chủ qua HTTP(S)/MQTT hoặc script LUA tùy biến.

Teltonika RUTM55 (6)

Thông số kỹ thuật

Danh mục Thông tin chi tiết
Công nghệ di động 5G Sub-6 GHz (SA, NSA), 4G LTE Cat 19, eSIM hỗ trợ 7 profiles
Tốc độ 5G DL lên đến 3.4 Gbps (4×4 MIMO), UL lên đến 900 Mbps (2×2 MIMO)
Cổng SIM Dual SIM + eSIM, Auto-failover, SIM Idle Protection, PIN management
Cổng Ethernet 1 x WAN, 3 x LAN (10/100/1000 Mbps), auto MDI/MDIX
Wi-Fi Wi-Fi 5 (802.11b/g/n/ac Wave 2), Dual-Band, MU-MIMO, tốc độ đến 867 Mbps
Serial RS232/RS485 (qua đầu nối công nghiệp)
I/O Digital input/output, hỗ trợ giám sát từ xa và điều khiển thiết bị
Nguồn 3-PIN industrial power connector, 9–30 VDC
VPN OpenVPN, IPsec, WireGuard, ZeroTier, DMVPN, PPTP, L2TP, SSTP, Stunnel, Tinc, Tailscale
Quản lý WebUI, SSH, SMS, SNMP, MQTT, Teltonika RMS, JSON-RPC, TR-069
CPU & RAM MediaTek Dual-Core 880 MHz, 256 MB RAM, 256 MB NAND Flash
Hệ điều hành RutOS (dựa trên OpenWRT)
Nền tảng IoT Hỗ trợ ThingWorx, Azure IoT Hub, Cumulocity Cloud
Bảo mật TPM 2.0, SSL/TLS, VPN, tường lửa, lọc truy cập, xác thực đa lớp
Kích thước & Vỏ máy Vỏ kim loại, kích thước tiêu chuẩn công nghiệp

Ứng dụng thực tế

  • Kết nối internet tốc độ cao cho nhà máy, khu công nghiệp, trạm điều khiển từ xa
  • Giải pháp truyền thông dữ liệu trong Smart Grid, Smart City
  • Tích hợp mạng và giám sát từ xa cho thiết bị tự động hóa (PLC, cảm biến, RTU…)
  • Kết nối redundant (dự phòng) cho hệ thống mạng quan trọng nhờ tính năng Failover & Load Balancing
  • Thích hợp dùng cho xe chuyên dụng, các hệ thống đo đếm điện/nước thông minh, camera an ninh công nghiệp

Teltonika RUTM55 (7)

Địa chỉ phân phối Router Teltonika RUTM55 uy tín tại Việt Nam

Raycom Distribution là NPP chính của thương hiệu Teltonika tại Việt Nam. Với mong muốn thúc đẩy việc kết nối với các đại lý, nhà thầu tiếp cận với thiết bị Teltonika chính hãng kèm dịch vụ hỗ trợ tốt nhất, Raycom luôn cam kết đảm bảo các yếu tố:

  • Sản phẩm đa dạng: Danh mục sản phẩm đa dạng, đáp ứng đầy đủ nhu cầu của khách hàng, đặc biệt là các dòng Switch công nghiệp, Router công nghiệp…
  • Giá tốt: Các đại lý, nhà thầu và dự án lớn nhỏ luôn được hỗ trợ mức giá tốt đi kèm nhiều ưu đãi hấp dẫn.
  • Chất lượng đảm bảo: Sản phẩm đến tay khách hàng luôn là chính hãng với đầy đủ CO/CQ, đáp ứng các tiêu chuẩn khắt khe về chất lượng.
  • Hỗ trợ dự án: Raycom sẵn sàng hỗ trợ, tư vấn và thiết kế lên BOM dự án.
  • Dịch vụ CSKH chuyên nghiệp: tư vấn chuyên nghiệp từ báo giá đến thông tin sản phẩm, lên giải pháp, hỗ trợ kỹ thuật, dịch vụ hậu mãi…

RAYCOM-NHA-PHAN-PHOI-CHINH-CUA-TELTONIKA-TAI-VIET-NAM

Raycom đã có gần 10 năm kinh nghiệm trong việc phân phối thiết bị và tư vấn giải pháp mạng công nghiệp tại Việt Nam. Đây là nơi tập hợp đội ngũ chuyên gia nhiệt huyết và giàu kinh nghiệm trong ngành. Với Raycom, Quý Khách Hàng không chỉ nhận được các sản phẩm chất lượng cao mà còn được hỗ trợ bởi đội ngũ chuyên gia tận tâm và giỏi chuyên môn. Bên cạnh đó, quy trình xuất kho và thanh toán được đơn giản hóa và linh hoạt, tiết kiệm thời gian chi phí.

CÔNG TY CỔ PHẦN PHÂN PHỐI RAYCOM

LIÊN HỆ TƯ VẤN & BÁO GIÁ

    Mobile
    Mobile module 5G Sub-6 GHz SA, NSA 2.4, 3.4Gbps DL (4x4 MIMO) 900, 550Mbps UL (2x2 MIMO); 4G LTE: DL Cat 19 1.6Gbps (4x4 MIMO), UL Cat 18 200Mbps
    3GPP Release Release 16
    eSIM Consumer type eSIM, profile download and removal operations, up to 7 eSIM profiles; does not include data plans
    SIM switch Dual SIM and eSIM, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
    Status IMSI, ICCID, operator, operator state, data connection state, network type, CA indicator, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC
    SMS SMS status, SMS configuration, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
    USSD Supports sending and reading Unstructured Supplementary Service Data messages
    Block/Allow list Operator block/allow list (by country or separate operators)
    Multiple PDN Possibility to use different PDNs for multiple network access and services
    Band management Band lock, Used band status display
    SIM idle protection service When working with devices with two SIM slots, the one not currently in use will remain idle until the device switches to it, meaning that no data is used on the card until then
    SIM PIN code management SIM PIN code management enables setting, changing, or disabling the SIM card's PIN
    APN Auto APN
    Bridge Direct connection (bridge) between mobile ISP and device on LAN
    Passthrough Router assigns its mobile WAN IP address to another device on LAN
    Framed routing Framed routing: support an IP network behind 5G UE
    Wireless
    Wireless mode 802.11b/g/n/ac Wave 2 (Wi-Fi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO)
    Wi-Fi security WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect, 802.11w Protected Management Frames (PMF)
    SSID/ESSID SSID stealth mode and access control based on MAC address
    Wi-Fi users Up to 150 simultaneous connections
    Wireless Connectivity Features Wireless mesh (802.11s), fast roaming (802.11r), BSS transition management (802.11v), radio resource measurement (802.11k)
    Wireless MAC filter Allowlist, blocklist
    Wireless QR code generator Once scanned, a user will automatically enter your network without needing to input login information
    Ethernet
    WAN 1 x WAN port 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
    LAN 3 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
    Network
    Routing Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing
    Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL)
    VoIP passthrough support H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
    Connection monitoring Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
    Firewall Port forward, traffic rules, custom rules, TTL target customisation
    Firewall status page View all your Firewall statistics, rules, and rule counters
    Port management View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on
    Network topology Visual representation of your network, showing which devices are connected to which other devices
    Hotspot Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes and optionality to upload and download customised hotspot themes
    DHCP Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards
    QoS / Smart Queue Management (SQM) Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
    DDNS Supported >77 service providers, others can be configured manually
    DNS over HTTPS DNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS
    Network backup Wi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover
    Load balancing Balance Internet traffic over multiple WAN connections
    SSHFS Possibility to mount remote file system via SSH protocol
    VRF support Initial virtual routing and forwarding (VRF) support
    Traffic Management Real-time monitoring, wireless signal charts, traffic usage history
    Security
    802.1x Port-based network access control client
    Authentication Pre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS users authentication, IP & login attempts block, time-based login blocking, built-in random password generator
    Firewall Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
    Attack prevention DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
    VLAN Port and tag-based VLAN separation
    Mobile quota control Mobile data limit, customizable period, start time, warning limit, phone number
    WEB filter Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
    Access control Flexible access control of SSH, Web interface, CLI and Telnet
    TPM Identification and authentication module, TPM 2.0 standard
    SSL certificate generation Let's encrypt support
    VPN
    OpenVPN Multiple clients and a server can run simultaneously, 27 encryption methods
    OpenVPN Encryption DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
    IPsec XFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
    GRE GRE tunnel, GRE tunnel over IPsec support
    PPTP, L2TP Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
    Stunnel Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
    DMVPN Method of building scalable IPsec VPNs, Phase 2 and Phase 3 and Dual Hub support
    SSTP SSTP client instance support
    ZeroTier ZeroTier VPN client support
    WireGuard WireGuard VPN client and server support
    Tinc Tinc offers encryption, authentication and compression in it's tunnels. Client and server support.
    Tailscale Tailscale offers speed, stability, and simplicity over traditional VPNs. Encrypted point-to-point connections using the open source WireGuard protocol
    OPC UA
    Supported modes Client, Server
    Supported connection types TCP
    MODBUS
    Supported modes Server, Client
    Supported connection types TCP, USB
    Custom registers MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality
    Supported data formats 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
    DATA TO SERVER
    Protocol HTTP(S), MQTT, Azure MQTT
    Data to server Extract parameters from multiple sources and different protocols, and send them all to a single server; Custom LUA scripting, allowing scripts to utilize the router's Data to server feature
    MQTT Gateway
    Modbus MQTT Gateway Allows sending commands and receiving data from MODBUS Server through MQTT broker
    DNP3
    Supported modes TCP Master, DNP3 Outstation
    Supported connection TCP, USB
    DLMS/COSEM
    DLMS Support DLMS - standard protocol for utility meter data exchange
    Supported modes Client
    Supported connection types TCP
    API
    Teltonika Networks Web API (beta) support Expand your device's possibilities by using a set of configurable API endpoints to retrieve or change data. For more information, please refer to this documentation: https://developers.teltonika-networks.com
    Monitoring & Management
    WEB UI HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, firmware update availability notifications, event log, system log, kernel log, Internet status
    FOTA Firmware update from server, automatic notification
    SSH SSH (v1, v2)
    SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET
    Call Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, Wi-Fi on/off
    Email Receive email message status alerts of various services
    TR-069 OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
    MQTT MQTT Broker, MQTT publisher
    SNMP SNMP (v1, v2, v3), SNMP Trap, Brute force protection
    JSON-RPC Management API over HTTP/HTTPS
    RMS Teltonika Remote Management System (RMS)
    IoT Platforms
    ThingWorx Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
    Cumulocity - Cloud of Things Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength. Has reboot and firmware upgrade actions
    Azure IoT Hub Can be configured with Data to Server to send all the available parameters to the cloud. Has Direct method support which allows to execute RutOS API calls on the IoT Hub. Also has Plug and Play integration with Device Provisioning Service that allows zero-touch device provisioning to IoT Hubs
    System Characteristics
    CPU MediaTek, Dual-Core, 880 MHz, MIPS1004Kc
    RAM 256 MB, DDR3
    FLASH storage 16 MB serial NOR flash, 256 MB serial NAND flash
    Firmware / Configuration
    WEB UI Update FW from file, check FW on server, configuration profiles, configuration backup
    FOTA Update FW
    RMS Update FW/configuration for multiple devices at once
    Keep settings Update FW without losing current configuration
    Factory settings reset A full factory reset restores all system settings, including the IP address, PIN, and user data to the default manufacturer's configuration
    FIRMWARE CUSTOMISATION
    Operating system RutOS (OpenWrt based Linux OS)
    Supported languages Busybox shell, Lua, C, C++, and Python, Java in Package manager
    Development tools SDK package with build environment provided
    GPL customization You can create your own custom, branded firmware and web page application by changing colours, logos, and other elements in our firmware to fit your or your clients’ needs
    Package Manager The Package Manager is a service used to install additional software on the device
    Location Tracking
    GNSS GPS, GLONASS, BeiDou, Galileo and QZSS
    Coordinates GNSS coordinates via WebUI, SMS, TAVL, RMS
    NMEA NMEA 0183
    NTRIP NTRIP protocol (Networked Transport of RTCM via Internet Protocol)
    Server software Supported server software TAVL, RMS
    Geofencing Configurable multiple geofence zones
    Serial
    RS232 Terminal block connector: TX, RX
    RS485 Terminal block connector: A,B(2 wire interface)
    Serial functions Console, Serial over IP, Modem, MODBUS gateway, NTRIP Client
    USB
    Data rate USB 2.0
    Applications Samba share, USB-to-serial
    External devices Possibility to connect external HDD, flash drive, additional modem, printer, USB-serial adapter
    Storage formats FAT, FAT32, exFAT, NTFS (read-only), ext2, ext3, ext4
    Input / Output
    Input 1 x digital dry input (0 - 3 V), 1 x digital galvanically isolated input (0 - 50 V), 1 x analog input (0 - 24 V)
    Output 1 x Isolated open collector output (requires external voltage) (50 V, 500 mA), 1 x SPST relay output (24 V, 10 A)
    Events Email, RMS, SMS
    I/O juggler Allows to set certain I/O conditions to initiate event
    Power
    Connector 3-pos plugable terminal block
    Input voltage range 9 – 50 VDC, reverse polarity protection, surge protection >51 VDC 10us max
    PoE (passive) Passive PoE over Port 1; 9-50VDC; "Mode B" style. Not compatible with 802.3af/at/bt.
    Power consumption Idle: < 8.5 W, Max: < 14.5 W
    Physical Interfaces
    Ethernet 4 x RJ45 ports, 10/100/1000 Mbps
    I/O’s 1 x digital dry input, 1 x digital galvanically isolated input, 1 x analog input, 1 x Isolated open collector output, 1 x SPST relay output
    Status LEDs 3 x Mobile connection type, 3 x Mobile connection strength, 6 x LAN status, 1 x Power
    SIM 2 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, internal SIM holders
    Power 1 x 3-pin power connector
    Antennas 4 x SMA for Mobile, 2 x RP-SMA for Wi-Fi, 1 x SMA for GNSS
    USB 1 x USB A port for external devices
    RS232 2 pins in 16-pin terminal block
    RS485 2 pins in 16-pin terminal block
    Reset Reboot/User default reset/Factory reset button
    Physical Specification
    Casing material Anodized aluminum housing and panels
    Dimensions (W x H x D) 132 x 44.2 x 95 mm
    Weight 430 g
    Mounting options DIN rail, wall mount, flat surface (all require additional kit)
    Operating Environment
    Operating temperature -40 °C to 75 °C
    Operating humidity 10% to 90% non-condensing
    Ingress Protection Rating IP30
    Regulatory & Type Approvals
    Regulatory CE, UKCA, CB, RCM, EAC, UCRF, WEEE

    Raycom là NPP chính (Master Distributor) của Teltonika & Volktek tại VN:
    • Sản phẩm chính hãng 100%, đầy đủ CO/CQ
    • Giá tốt cho đại lý/SI
    • Lưu kho số lượng lớn
    • Cam kết bảo vệ dự án cho đại lý
    • Tư vấn kỹ thuật và giải pháp miễn phí
    Hỗ trợ nhanh:
    0932 728 972
    Chat Zalo